Dark Light
,

Stepper Motor Direction / Speed Drive Controller Pulse Signal Generator

Availability:

Out of stock


بورد متحكم سرعة صناعي لمحرك الستيبر، يستخدم لتوليد اشاره PWM لتغذية الدرايفر الخاص بالستبر موتور، ويتم التحكم بسرعة المحرك عن طريق مقاومة متغيرة Knob مثبتة على البورد، اضافة الى ذلك يوفر هذا البورد امكانية عكس اتجاه دوران المحرك بضغطة زر واحدة بالإضافة الى زر اخر يستخدم لإطفاء وتشغيل البورد. يتميز البورد بفولتية مصدر عالية تبدأ من 12 ولغاية 160 فولط وفولتية اشارة 5 الى 12 فولت، بالإضافة الى امكانية التحكم بتردد الاشارة الخارجة بمدى واسع ليتناسب مع جميع التطبيقات والانواع (82 هرتز – 127 كيلو هرتز) عن طريق جمبر الى ثلاث مستويات مما يوفر حريه أكبر للتحكم في سرعة الموتور. 

17,500 د.ع

Out of stock

Compare

When the controller generates a pulse frequency signal, it can be used as a signal for the stepper driver. Drivers are also required to control the stepper motor. This simple controller + Stepper motor driver + Stepper motor + DC power supply can form a simple control platform. The controller can generate a pulse frequency signal, it can also be generated. PWM Signal pulse duration. There is a bouncing needle on the board., You can set options Select, the default setting should generate a pulse frequency signal.

When the controller generates a frequency pulse signal, has a high, low frequency signal can be selected by a jumping needle, the frequency parameters are approximately:
High: 5.8 kHz-127 kHz
V: 590 Hz-15.8 kHz
Low: 82 Hz-2.3 kHz,

 

Specifications:

  • This is a pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver.
  • If you want to control the stepper motor, you should still use a motor driver.
  • If you want to change the Frequency Range, you can change C46 capacitance.
  • Power supply: DC15-80V or DC 12V.
  • Reverse engine and rotation, stop and run can be controller by keys.
  • The motor speed can be controlled by adjusting the potentiometer.
  • Size: 73x51x37MM

 

Package Includes
1 x Stepper motor drive controller

SKU: 652 Categories: ,
  • This is a pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver.
  • If you want to control the stepper motor, you should still use a motor driver.
  • If you want to change the Frequency Range, you can change C46 capacitance.
  • Power supply: DC15-80V or DC 12V.
  • Reverse engine and rotation, stop and run can be controller by keys.
  • The motor speed can be controlled by adjusting the potentiometer.
  • Size: 73x51x37MM

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.