Load Cell (Strain Gauge) 50kg Sensor Micro Scale Half-bridge Weighing Sensor

Features
Internal half-bridge strain gauge load cell range is 50KG, half-bridge structure.
Dimensions: 28mm * 28mm
Installation: suspended above the middle on both sides of the fixed platen force output voltage signal
Surface -scale output voltage = excitation voltage x sensitivity 1.0mv / v

Note:
Please see the instructions for use, applying pressure means press the “direction of the force ” schematically the correct force is applied ; the E-shaped intermediate portion of the sensor and the two side edges to form a shear force in the opposite direction .

Wiring:
Reverse direction by the force2 sensor allows a group of two sensor black and black to blue and blue then do the output signal, sensor 2 red one do with an input voltage as input voltage +-
Force in one direction Two sensors connected blue and black blue and red a black pick two sensor input voltage + one do to make the input voltage –

The internal sensor is a half-bridge strain gauge group, use the following three methods:
Method (1): Use a sensor with an external resistor full bridge measurement range is a range of the sensor: 50KG For external resistors require a higher (Not recommended to buy)
Method (2): Using two sensors full bridge measurement with two sensors and a range of: 50KG * 2 = 100kg
Method (3): Use the four full-bridge sensors measuring range is four sensor range of: 50KG * 4 = 200kg

Specifications:

Package Includes:
1 x Load Cell (Strain Gauge) 50kg Sensor