Dark Light
, , ,

IR Obstacle Avoidance Sensor 4-Wires

(2 customer reviews)

In stock

متحسس IR لتحسس العوائق واكتشافها، حيث يمكن استخدامه في الروبوتات والعجلات لتنجنب العوائق وممكن استخدامة في الكثير من التطبيقات الاخرى مع جميع انواع المتحكمات واهمها الاردوينو لتحسس او قياس المسافات من 2 الى 40 سم. يعمل الحساس بفولتية تتراوح من 3.3 الى 5 فولت من ما يجعله مناسب لجميع المتحكمات.

1,750 د.ع

In stock


IR Infrared Obstacle Avoidance Sensor

Object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.
Sensing distance 2-40 cm, distance, good anti-jamming capability. (Note: The infrared sensor cannot detect all objects get the same distance, objects of different colors of light reflectance of different objects closer darker black shorter distance detected, the sensor 2-40 cm is measured against the white wall of)
Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters, cutting lines, liquid level detection.
This sensor is made with black and white lines tracing the car ran without black line on white paper, available in concrete The yellow complex environment such as the black line patrol track. As long as the black line around the slightly lighter color than black can, eliminating the traditional moves, so that environmental layout easier.
The sensor 3 to 6V supply, wide range, suitable for 3V and 5V MCU system.
With Enable, EN terminal is equal to “1” when the sensor does not work, equal to “0” when working. Jump on the sensor end cap long after the EN grounding plug (EN long as “0”). To use the EN pin when the jumper cap is removed.
Frequency adjustment potentiometer is used to adjust the carrier frequency of the infrared emission tube, because the integration receiver 38KHZ in particular when the carrier frequency is the most sensitive. The 502 resistor clockwise transferred do (that is, the launch tube at maximum brightness), and then at a white wall tone 103 resistance, has been transferred to the sensing distance is the farthest so far so that the sensor will work in the best state

Working voltage: DC 3.3V-5V
Working current: 20mAh
Working temperature: -10’C~+50’C
Detection distance: 2~40cm
IO interface: 4 line (-/+/S/EN)
Output signal: TTL Level
Adjusting mode: Multi resistance regulation
Effective angle: 35°
Size: 4.5 x 1.1cm(approx)

Package Includes:
1 x IR Obstacle Avoidance Sensor 4-Wires

SKU: 62 Categories: , , ,
  • VCC voltage is 3.3V to 5V converter (which can be directly connected to 5V single-chip microcontroller and 3.3V)
  • GND external GND
  • OUT of small plate digital output interface (0 and 1)

Based on 2 reviews

4.5 overall

Only logged in customers who have purchased this product may leave a review.

  1. ehusni (verified owner)



  2. s_chalabi (verified owner)

    very good