Dark Light
, ,

12V Brass Motorized Ball 1/2″ Valve for Flow Control


In stock

صمام صناعي للتحكم في السوائل والغازات والدهون، يمكن التحكم بمعدل الجريان فيه من خلال التحكم بحجم فتحة الصمام وبقوة تحمل ضغط قدرها 1.0Mpa وحرارة تصل الى 100 درجة مئوية. يعمل على 12 فولت ويمكن ربطه مباشرة مع الانابيب بحجم 1/2 نصف انج، مصنوع من البراص يتميز باستقراريه عالية في العمل ويمكن استخدامه لفترات طويلة ومصنوع ليتحمل الظروف الصناعية تحت التصنيف IP67. يحتوي على 3 اسلاك للتحكم وكل ما تحتاجه هو فقط وضع الإشارة في السلك المخصص للفتح او الغلق وسيقوم الصمام بدوره حيث يعتمد مقدار الفتح والغلق على الوقت الذي يتم تطبيق الإشارة فيه. يمكن استخدامه في العديد من التطبيقات كتطبيقات التحكم بالمياه او الغاز او التحكم بتفاعل كيميائي عبر التحكم بكمية الموائع الداخلة له عبر الصمام والكثير من التطبيقات الأخرى وبالأخص الصناعية منها.

33,500 د.ع

In stock



  • Simple to use: 3-wire 2-point control mode will largely save both your time and labor in the simple wiring. This DN15 electric ball valve is an Ideal alternative to solenoid valve, and suits for projects that require a long time to open the valve.
  • Performance: The limit switch will minimize the power when the valve is completed open, very convenient. If there is a power cut off, the valve will return to a completely closed state.
  • Stability: The ball valve is made of high-quality brass material, which is stable and durable. It can be used for a long time.
  • Small size: The ball valve is small and light in weight, which is convenient for you to carry around.
  • Convenient: Under the effective working voltage, this electric ball valve will open or close the valve within 3 to 5 seconds.


Item Type: Electric Ball Valve
Model: CWX-15N-CR02- -DN15
Valve outlet/Inlet size: 1/2 inch
Adaptation Caliber: DN15
Rated Voltage: DC 12V
Medium Temperature: The temperature is equal to or less than 100℃.
Working Pressure: Maximum 1.0Mpa
Protection Grade: IP67
Connection Method: CR02
Commodity Application: Water Treatment Miniature Electric Ball Valve
Flow Direction: Straightway
Cable length: Approx. 35cm 
Thread Standard: BSP


How to use it:
1) The SW is connected with OPEN, and the valve is opened; when it is in place, the internal power is automatically cut off, and the valve remains in the open state.
2) The SW is connected with CLOSE, and the valve is closed; when it is in place, the internal power is automatically cut off, and the valve remains in the closed state.


– Fan coil
– Air conditional
– Water Heater
– Solar heating
– Water treatment
– Water automatic control
– Replacing solenoid valve, particularly when solenoid cannot work reliably.


Package Includes:
1 x 12V Brass Motorized Ball 1/2″ Valve

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.