Printing Parameters
| Nozzle temp | 190 – 210°C |
| Best nozzle temperature | 200°C |
| Heated bed temperature | 40-50°C |
| Printing speed | 30-50 mm/s |
Material Parameters
| Density | 1.28 g/cm3, 21.5°C |
| Melt Flow Index | 61 g /10 min, 190°C/2.16 kg |
| Heat Distortion Temp | 49°C |
| Tensile Strength | 66 Kg/cm2 |
| Tensile Elongation | 15% |
| Flexural Strength | 69 Kg/cm2 |
| Flexural Modulus | 34000 Kg/cm2 |
| Impact Strength | 4.2 KJ/m² |
| Diameter Accuracy | 1.75mm: 1.70~1.78mm |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.