Dark Light
, ,

1Hz-150KHz 3-Channels PWM Signal Generator Adjustable Frequency and Duty Cycle

Availability:

Out of stock


بورد توليد إشارة PWM بثلاثة قنوات مختلفة يدعم خاصية الـتحكم عبر الـ UART، يستخدم لتوليد 3 إشارات مختلفة وكل واحدة لها الإعدادات الخاصة بها. يمكن من خلال هذا الكارت توليد إشارات PWM متغيرة التردد من 1Hz الى 150kHz وتغيير الـ Duty Cycle للإشارة من 0 الى 100 ولكل قناة بشكل معزول عن الأخر. يمتاز بدقة عالية وثبات في العمل ويعمل بفولتية من 3.3V الى 30V ويمكن تغذية أي تطبيق بهذه الاشارة وبتيار يصل الى 30 ملي امبير. ميزة إضافية مهمة هي إمكانية التحكم بالإعدادات للقنوات عبر منفذ الـ Serial Port من أي متحكم أي يمكنك مثلا تغيير التردد والـ Duty Cycle لأي قناة من خلال متحكم مثل الأردوينو وغيره. ايضاً في حال انقطاع مصدر الطاقة، فأن البورد يبقى يحتفظ بأخر الإعدادات مما يجعله مناسب لكثير من التطبيقات الصناعية وغيرها مثل التحكم بالمحركات ومختلف أجهزة التحكم والأجهزة المخبرية

8,250 د.ع

Out of stock

Compare

1Hz-150KHz 3-Channels PWM Signal Generator Adjustable Frequency and Duty Cycle

Features:

  • Support Serial operation
  • Three separate channels
  • Wide frequency range, high precision
  • LCD can display frequency and duty ratio, Easy to operate
  • Output of three-channel PWM at the same time, Adjustable frequency, 3-channel frequency output consistent, duty ratio can be independently adjusted, suitable for most occasions

Specifications:
Operating voltage: 3.3~30V;
Frequency range: 1Hz~150KHz;
Frequency accuracy: In each range of accuracy is about 2%
Signal load capacity: Output current can be around 5~30ma
Output amplitude: PWM amplitude and supply voltage equal
Ambient temperature: -20~+70°
Size: 5.5×3.8cm

Display Specifications:
Three-channel PWM is outputted, wide frequency range and the duty ratio can be adjusted independently
Frequency is divided into four areas, automatic switching:

XXX (No decimal point): 1HZ Stepping Unit, Range: 1Hz~999Hz;
X.XX(The decimal is in the hundreds place): 0.01KHZ Stepping Unit, Range: 1.00Khz~9.99Khz;
XX.X(The decimal is in the tens place): 0.1KHZ Stepping Unit, Range: 10.0Khz~99.9Khz;
X.X.X(The decimal is in the ones place): 1KHZ Stepping Unit, Range: 1Khz~150Khz;

e.g., frequency display: 100 represent the pulse of 100Hz;
1.01 represent the pulse of 1.01KHz;
54.1 represent the pulse of 54.1KHz
1.2.4 represent the pulse of 124Hz
The value range of duty factor: 0~100%,100% is represented by A0%.
All parameters set up can be automatically saved in case of power cut.

Parameter settings
Module has 8 independent keys, used to set the frequency and duty ratio, support short press (increase or decrease a unit) and long press (fast increase or decrease), very simple, set the parameters automatically save, power loss.
3-Way duty ratio button can be pressed at the same time, real-time adjustment, liquid crystal display is the last pressed button duty ratio, real-time is very strong, can be used as a simple several road duty ratio scan.

Scope of application
1. Used as square wave signal generator to generate square wave signal for experiment development and use
2. Used to generate a square wave signal to control the motor driver;
3. Generating adjustable pulses for MCU use;
4. Generate adjustable pulse, control related circuit (PWM dimming speed and other applications).

UART Serial Command
Baud rate: 9600 bps Data length:8
Stop bits: 1
Check digit: none
Flow control: none
Set the frequency of the PWM
“F101”: Set frequency of 101 HZ (001~999)
“F1.05”: Set frequency of 1.05 KHZ(1.00~9.99)
“F10.5”: Set frequency of 10.5KHZ(10.0~99.9)
“F1.0.5”:Set frequency of 105KHZ(1.0.0~1.5.0)
Set the duty ratio of PWM
“DX:YYY”: Set PWM duty ratio x: (1~3) PWM serial number,YYY: (000~100) duty ratio;
For example d1:050,set 1th PWM duty ratio to 50%
3.Read Setup parameters
Send a “read” string to read the parameters of the setting.
Message format:F156,D1:052,D2:059,D3:058,
Set successful return: DOWN
Set failed to return: FALL

Package Includes:
1x 3-Channels PWM Signal Generator

  • Operating voltage: 3.3~30V;
  • Frequency range: 1Hz~150KHz;
  • Frequency accuracy: In each range of accuracy is about 2%
  • Signal load capacity: Output current can be around 5~30ma
  • Output amplitude: PWM amplitude and supply voltage equal
  • Ambient temperature: -20~+70°
  • Size: 5.5×3.8cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.